1. Carefully remove the speaker from its case and place it upright.
2. Remove the power cable from the case. Plug one end into the speaker and the other end into a wall outlet.
3. Flip the ON/OFF switch to the ON position.
4. Press the MODE button just beneath the speaker’s display. The display will read ‘bt’ and display the Bluetooth logo.
5. Pair your device to the speaker. The speaker’s name will appear as ‘TQ8’.
6. Turn the volume up to the maximum level on your device.
7. To adjust the volume of the music playing from the speaker, turn the LEVEL knob under the MAIN CONTROL section on the back of the speaker. Turning the knob counterclockwise will turn the volume down. Turning the knob clockwise will turn the volume up.
8. Optionally, you can adjust the HIGH, MID, and LOW knobs to increase or decrease the level of the high, mid, or low frequencies in the music. Unless you are familiar with equalisation, it is best practice to leave all these knobs at unity (the center line).
9. When you are done using the speaker, flip the ON/OFF switch to the OFF position before unplugging the power cable.
10. Pack the speaker and the power cable back into the case.